Product Features
- The robot uses LiDAR SLAM navigation, combined with the inertial guidance system forpositioning correction to achieve ±5mm accurate positioning.
- The carrying capacity is 600kg, and User can customize the top according to demand.
- The equipment adopts the modular design of the whole machine, which makes theassembly and maintenance more convenient.
- The battery life can last for more than 8 hours, and the robot can automatically chargewith low power (set the low power value according to the customer’s requirements).
- Cluster scheduling, in the robot control system, you can view the working status, electricity, location and other information of all robots at the same time, and schedule all devices through the system.
- Equipped with LiDAR safety barrier avoidance, front contact anti-collision bar, left andright emergency stop buttons, multiple safety protection to protect equipment and cargo
- safety. Realizing unmanned operation by the system path planning, and the staff only need togive instructions through the control terminal.
Product Dimension
Product Specification
| Basic parameters | Name | Under Drive Chassis Moving Robot-W3-600MB |
| Navigation mode | LiDAR SLAM | |
| Drive mode | Double wheel differential | |
| Dimension(L*W*H) | 950*650*250mm（with bumper strip） | |
| Weight（with batteries） | 180KG(±10KG) | |
| Maximum payload | 600KG | |
| Chassis ground clearance | 25mm | |
| Network | Ethernet / Wi-Fi 802.11 a/b/g/n/ac | |
| Ambient temperature and humidity range | Temperature : 0~50℃ / Humidity: 10~90%, No compression condensation | |
| IP rating [1] | IP20 | |
| Performance parameters | Passability (slope/step/gap) [2] | ≤5%/5mm/30mm |
| Navigation position accuracy [3] | ±5mm | |
| Navigation angle accuracy [3] | ±1° | |
| Operation speed (Adjustable) | ≤1.5m/s | |
| Battery parameters | Battery capacity | 48V/24AH Lithium iron phosphate |
| Comprehensive battery life | 8h | |
| Charging time(10-80%) | ≤2h | |
| Charging mode | Manual/Automatic | |
| Cycle times | 1500 cycles，capacity≥80% | |
| Safety protection | LiDAR SLAM number | 2 |
| Emergency stop button | √ | |
| Speaker | √ | |
| Ambient light | √ | |
| Bumper strip | √ | |
| Functions | Basic functions [4] | √ |
| Wi-Fi roaming | √ | |
| Automatic charging | √ | |
| Shelf recognition function | √ | |
| Tag-along function | × | |
| QR code accurate positioning function | Optional |
[1]. Designed for indoor transport, not recommended for outdoor environments.
[2]. Road surface is smooth, clean and without significant undulations. Slope 5% =
arctan(0.05) ≈ 2.8°. The robot may not stop or turn at ramps, steps, or gaps, but may only
pass quickly perpendicular to them.
[3]. Navigation accuracy usually refers to the repeated accuracy of the robot navigation to
the target site. When the environment scanned by the robot LiDAR is relatively stable
(change rate <30%), the repeated accuracy of the robot navigation from the fixed direction
to the target site can reach the expected value. When the robot runs along the virtual path, it
will try to fit the path, but it does not guarantee repeatability. That is, the robot can
guarantee the accuracy of the point, without guaranteeing the accuracy of the navigation
path. The minimum site spacing supported by the robot is 1cm.
[4]. The basic functions include map editing, model editing, positioning and navigation,
basic motion model (differential), API interface, etc
